Ducati SPORTCLASSIC PAUL SMART 1000 LIMITED EDITION 2006 User Manual

E
12
LCD unit functions
When turning the key from OFF to ON (Key-ON) the
instrument panel carries out a Check of the whole
instruments: indexes, displays and pilot lights (see fig. 5
and fig. 6).
LCD (1)
Turn the key to ON and press (A, fig. 6) to display trip
meter and odometer alternatively.
Resetting the trip meter
Keep (A, fig. 6) pressed for more than 2 seconds. When
the TRIP function is enabled (trip meter), display (LCD 1)
will reset.
LCD (2)
Turn the key to ON and press (B, fig. 6) to display clock and
oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds.
Press (A, fig. 6) to set AM/PM. Press (A, fig. 6) to set
hours. Use button (A) to change hour value. Press (B) to
set minutes.
Press (A) to increase the value. Keep the button pressed
for more than 5 seconds to proceed faster. Press (B) to
quit this function.
KM/H
MIN x 1000
-1
OFF
fig. 5
TOT
TRIP
¡C
¡F
AMPM
TOT
TRIP
¡C
¡F
AMPM
MIN x 1000
-1
KM/H
1
2
A
B
CHECK
fig. 6

Ducati SPORTCLASSIC PAUL SMART 1000 LIMITED EDITION 2006 Specifications

General

Brand	Ducati
Model	SPORTCLASSIC PAUL SMART 1000 LIMITED EDITION 2006
Category	Motorcycle
Language	English