Table of Contents
1 Unpacking Instructions and Warnings
2 Seymour Duncan Convertible 2000
3 Installing & Changing Preamp Modules
6 Tubes
7-8 Preamp Module Chart
9-10 Front of the Convertible 2000
11-12 Rear Controls of the Convertible 2000
13 Load Resistor Plug Values & Sound Effects
14-16 Trouble Shooting
17 Specifications
18-19 Schematics
Unpacking
Inspect your Convertible amp for hidden damage that may have occurred in
transit your amp was inspected and sound tested before shipment from the
factory.
All claims for shipping damage must be made by the receiver. Save your box and
packing material for evidence of damage if it has occurred.
Packing Materials
The original box and packing materials are specially designed to protect your
amp during shipment.
*SAVE ALL PACKING MATERIALS.
In the unlikely event that your amp needs to be returned to the factory, the original box and
packing material will be necessary for shipment. These are carrier approved packing materials
and they will insure safe transit back to the factory.
Warning
To reduce the risk of fire or electrical shock,
DO NOT expose this amplifier to rain or moisture.
To Next Page
Loading...
