Dunelm MEMPHIS DAY BED

Need help?

Do you have a question about the Dunelm MEMPHIS DAY BED and is the answer not in the manual?

Overview

Important Technical Specifications
Usage Features
Maintenance Features
Assembly Process Overview
General Warnings and Information

The provided document is an assembly instruction manual for the "MEMPHIS DAY BED." This description will detail the device based on the information available in the manual.

The MEMPHIS DAY BED is a single bed designed for sleeping and relaxation. Its primary function is to provide a sturdy and comfortable sleeping surface. The bed features a classic design with decorative elements, suitable for various interior styles.

Important Technical Specifications:

Dimensions: W2010mm × D965mm × H995mm (Width × Depth × Height).
Size: 3ft (indicating a single bed size).
Colour Options: BLACK, IVORY.
Maximum Weight Capacity: 110kg per side. The manual explicitly states, "This product is intended for a maximum person's weight of 110kg per side. Do not exceed this weight."
Components:
- Right Side Panel (Qty: 1PC, Dimension: 96392538mm)
- Left Side Panel (Qty: 1PC, Dimension: 96392538mm)
- Back Panel (Qty: 1PC, Dimension: 192064727mm)
- Cross Rail (Qty: 1PC, Dimension: 192012027mm)
- End Rail (Qty: 2PCS, Dimension: 9008030mm)
- Wooden Slat (Qty: 13PCS, Dimension: 9855510mm)
- Single Plastic Cap (Qty: 26PCS, Dimension: 576013mm)
- Stopper (Qty: 4PCS, Dimension: Ø38*15mm)
- Ornament (Qty: 4PCS, Dimension: Ø60*100mm)
Fixings:
- Bolt-M6x15 (Qty: 18)
Tools Included:
- 4mm Allen key (Qty: 1)

Usage Features:

Assembly Recommendation: Due to its size, it is recommended to assemble the bed in the room where it will be used.
Assembly Surface: The manual advises laying out all components on a soft surface (e.g., rug, carpet, or packaging carton) to prevent scratching during assembly.
Stability: The bed is designed to be used on firm, level ground. Users are warned to "DO make sure the legs remain in contact with the ground."
Safety: The product should be fully assembled and secured as illustrated before use. All screws and bolts must be tightened and inspected regularly. Small components used in construction should be kept away from young children to avoid choking hazards.
Operational Integrity: Users are cautioned not to stand on the product and not to use it if parts are missing, damaged, or worn.

Maintenance Features:

Cleaning: The bed should be cleaned by wiping with a sponge and warm soapy water.
Prohibited Cleaning Agents: Users are explicitly warned, "Never use scourers, abrasives or chemical cleaners. Do not use solvent based cleaners or detergents as they can bleach or damage the product."
Regular Inspection: Periodical checks are recommended to ensure that all components are in their proper position, free from damage, and that all connectors are tight and secure. This helps maintain the bed's structural integrity and safety over time.

Assembly Process Overview:

The assembly process is broken down into four steps:

Step 1: Involves attaching the four stoppers (Part 8) to the bottom of the Right Side Panel (Part 1) and Left Side Panel (Part 2).
Step 2: Focuses on connecting the Right Side Panel (Part 1), Left Side Panel (Part 2), Back Panel (Part 3), and Cross Rail (Part 4) using 15mm M6 Bolts (Part A) and the 4mm Allen key (Part B). This forms the main frame of the bed.
Step 3: Involves attaching the two End Rails (Part 5) to the assembled frame using additional 15mm M6 Bolts (Part A) and the 4mm Allen key (Part B).
Step 4: The final step includes inserting the 13 Wooden Slats (Part 6) into the frame, securing them with 26 Single Plastic Caps (Part 7), and attaching the four Ornaments (Part 9) to the top posts of the bed.

General Warnings and Information:

The manual emphasizes the importance of reading instructions carefully and retaining them for future reference.
It warns against using power tools for assembly.
It advises against over-tightening screws or bolts and to avoid tightening them fully until the entire product is assembled.
Users should check the pack contents against the parts and fittings list and contact the retailer if any components are missing.
Packaging materials should not be destroyed until assembly is complete and all parts are accounted for.
The estimated setup time is 1.5 hours.