203
c HELP Mode Function and Operation Procedures
chap.7
¡ Operation procedure
1.
Enter
“
003
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-003
”
.
2.
Select the speed to be checked on the touch panel.
Select the speed.
(1) Checking/Adjusting Print Speed
Checking/Adjusting Print Speed.
2
PRINT SPEED
2
JOG SPEED
2
M-MAKE SPEED
2
PRESTOP SPEED
3.
Press the
(MASTER MAKING)
key. The drum rotates and the
rotation speed appears on the panel lower part.
Check the speed.
¡
The drum does not rotate even if the
drum removal button is pressed.
4.
Press the
(MASTER MAKING)
key. The drum rotates and the
rotation speed appears on the panel lower part.
Check the speed.
(See the next page for speed reference values.)
Press the (STOP) key to stop the drum at the stop position.
step 5.
a
Press the
(STOP)
key.
To Next Page
Loading...