Duplo DP-S850 - Page 227

226
c HELP Mode Function and Operation Procedures
chap.7
Adjusting/Checking the Clamp Section
2
Check operation.
CLAMP MOTOR
2
Checking sensors.
CLAMP SENSOR 1 / CLAMP SENSOR 2
¡ Operation procedure
1.
3.
Check the following sensors.
Checking sensors.
2.
Check operation.
4.
Enter
“
012
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-012
”
.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.