Duplo DP-S850 - HELP-006 Adjusting;Checking the Paper Feed Section

231
c HELP Mode Function and Operation Procedures
chap.7
Adjusting/Checking Operation
2
Check operation.
CLAMP MOTOR / EJECT MOTOR / MASTER FEED STEPPING MOTOR
¡ Operation procedure
1.
2.
HELP-016 to HELP-018 unused
Check operation.
Enter
“
019
”
by the
NUMERIC
keys and then press the
(PRINT)
key.When HELP-019 is entered, the thermal head moves up and
the ink roller moves down.
Call the HELP mode
“
H-019
”
.
3.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.