Duplo DP-S850 - HELP-007 Adjusting;Checking the Paper Eject Section

233
c HELP Mode Function and Operation Procedures
chap.7
Self-check, Data Display, etc.
2
Checking sensor , switch and etc.
FRONT COVER SENSOR / TOP COVER SWITCH / MAIN THERMISTOR /
THERMAL HEAD THERMISTOR
2
Self-check.
(SHADING MEMORY CHECK / FPGA CHECK)
2
Data Display.
(TIME LAPSE FROM LAST PRINT)
¡ Operation procedure
1.
Enter
“
021
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
“
Please wait.
”
is displayed and the shading memory and
FPGA are checked.
Call the HELP mode
“
H-051
”
.
2.
Check data.
Data are displayed.
3.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.