241
c HELP Mode Function and Operation Procedures
chap.7
(1) Test Pattern
2
Printing the test pattern.
2
Set to “4. B = 0: Upper cover switch disabled” and
“4. C =0: Scanner disabled” of HELP-061.
The test pattern can be made up and printed with the scanner opened.
¡ Operation procedure
1.
Enter
“
030
”
by the
NUMERIC
keys and then press the
(PRINT)
key. Memory check starts.
Call the HELP mode
“
H-030
”
.
2.
The test patter selection screen appears.
HELP-029 unused
To Next Page
Loading...