Duplo DP-S850 - HELP-021 Self-check, Data Display, etc.

248
c HELP Mode Function and Operation Procedures
chap.7
(2) ADF Read Adjustment (2 pages in total)
Page 2 : Adjustment.
2
ADF read width
ADF read length
ADF feed range
ADF trail edge end position
¡ Operation procedure
1.
2.
3.
4.
Enter
“
043
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-043
”
.
Adjust the ADF read.
Touch the
(
arrow
)
on the screen lower right once to switch to Page 2.
Change the screen.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.