252
c HELP Mode Function and Operation Procedures
chap.7
(2)
ADF scan Level Adjustment
(2 pages in total)
Page 2 : Adjustment.
2
PHOTO/TEXT mode
Black level , White level , Peak hold
2
PHOTO mode
Black level , White level , Peak hold
¡ Operation procedure
1.
3.
Adjust the ADF scan level.
4.
2.
¡Photo/Text mode, Photo mode
Adjust it by the black level and the
peak hold.
Do not change the white level.
Enter
“
044
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-044
”
.
Touch the
(
arrow
)
on the screen lower right once to switch to Page 2.
Change the screen.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...