255
c HELP Mode Function and Operation Procedures
chap.7
Online Master Making Adjustment
2
Adjustment.
M-MAKE HORIZONTAL START POS. : ONLINE
M-MAKE VERTICAL START POS. : ONLINE
¡ Operation procedure
1.
Enter
“
047
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-047
”
.
2.
Adjust the online master making.
3.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...