Duplo DP-S850 - Page 258

257
c HELP Mode Function and Operation Procedures
chap.7
For Factory Adjustment
2
CCD setting
¡ Operation procedure
1.
2.
For Factory Adjustment.
Enter
“
049
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-049
”
.
3.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.