Duplo DP-S850 - Page 260

259
c HELP Mode Function and Operation Procedures
chap.7
Setting (Model Name Change)
2
Changing the model name
Normally, do not change the model name; otherwise the model name
displayed on the PC is changed.
¡ Operation procedure
1.
2.
Change the model name.
(Normally, do not change the model name.)
3.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
Enter
“
051
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-051
”
.