Dupray ONE - Steam Hose Assembly; Hose Components; How to Use Your Steam Cleaner; Filling With Water

STEAM HOSE
CHILDPROOF SAFETY LOCK
STEAM RELEASE TRIGGER
VARIABLE PRESSURE CONTROL
Select the steam pressure
from minimum (-) to maximum (+).
STEAM HOSE
CONNECTOR
WARNING: This hose contains electrical connections, do not immerse in water for cleaning.
HOW TO USE YOUR STEAM CLEANER
FILLING WITH WATER
Remove the boiler cap (2) and fill between 700ml (23 oz) and 1L (34 oz) of water
in the boiler. Use the provided funnel if needed. The more water you put in,
the more humidity will be contained in the steam. The more space you leave
for steam, the drier it will be.Do not put more water than the recommended
quantity. Securely replace the boiler cap.
IMPORTANT:
Do not overfill with water.Leave space for steam!
PLUGGING IN THE MACHINE
Unravel completely the electrical cord. Connect the electrical cord
to a 15 or 20 amp 110V / 120V power outlet (make sure the circuit
is not already used by another high wattage appliance).
TURNING THE MACHINE ON
Turn the main dial to the
position. At this position the orange SteamReady™
indicator will come on when the unit reaches operating pressure, aer
approximately 10 minutes of heating time.
During use, the orange SteamReady™ indicator will turn on and o.
This is normal, and indicates that steam is being generated in the boiler.
8
en