DURABLE 5085 - Product-Specific Safety; Explanation of Symbols; Product Overview

EN

English
Product-specific safety instructions
• If monitors are used which exceed the permitted total weight,
this may result in damage or injury.
• The load-bearing surfaces, e.g. tabletops, must be able to se-
curely bear the total weight of monitors and all additional com-
ponents.
Explanation of symbols
• Signs and symbols must not be removed or covered.
Read and observe the user manual before starting to use
the product.
You must only use the product in dry indoor rooms.
Your product in overview
▶see figure1
Note:
Table mount depends on the product variant.
1. VESA plate for mounting monitor
2. Swivel joint
3. Monitor arm
4. Arm bracket
5. Table column
6. Table clamp table mount (product variant #5085)
7. Clamping screw (product variant #5085)
8. Cable hole table mount (product variant #5086)
9. Pressure plate (product variant #5086)
10. Clamping screw (product variant #5086)
11. Arm bracket slot nut
12. Monitor arm adjusting screw
13. Monitor mount clamping screw