DURABLE 5085 - Product Usage; Moving the Monitor; Exchanging Monitor; Cleaning and Maintenance

EN

English
Moving the monitor
▶see figure15
– Loosen the adjusting screws (13).
– Move the monitor into the desired position.
– Secure the monitor in position using the adjusting screw (13).
Exchanging monitor
▶see figure16
– Remove the cable clamps and monitor cable.
– Lift the monitor slightly to relieve the clamps.
– Press the clamps (16) of the VESA plate(1) together as shown
and lift the monitor out of the bracket(15).
– Release the VESA plate from the monitor and attach these as
described above to the new monitor.
Cleaning and maintenance
WARNING!
Risk of product damage!
Do not use any abrasive or sharp objects or aggressive
cleaning agents.
Do not use any solvents.
– In order to prevent the movement from decreasing due to dust
deposits, regular dust removal on the monitor bracket is rec-
ommended.
– Wipe the product with a dry or slightly damp microfibre cloth.
– Regularly check the monitor bracket and table mount for safety
and stability.