Durabuilt EasySHED - Component Check List; Optional Extras

OPTIONAL EXTRAS
Refer to separate instructions for component list and installation sequence.
◊ Double Door option 2x (C), 5x (A), Special Narrow Sheet replaces (Q), 4x (F), 2x (G), 2x (O),
1575mm (H), 2x (N), 3x (R), extra 1740mm (P).
•
1x (A) replaces (Q) for Sliding Door Kit options.
∆ 1x (A) cut out for Window option.
*
Sheet/Channel height will vary with Extra Height option.
#1x Fibreglass Sheet replacement with Skylight Option. ‡Replaced by Locking Door.
COMPONENT CHECK LIST - EasySHED
A
6x Plain Sheets (Step 1 4B 5)
780 x 1800mm
*
∆◊
•
C
1x Door Sheet (Step 4A)
780 x 1740mm
*
◊
B
8x Roof Sheets (Step 3)
780 x 1600mm #
I
8x Gable Sheets (Step 2)
780mm wide
*
Q
1x Narrow Sheet (Step 5)
700 x 1800mm
*
◊
•
E
6x U Channel (Step 2 3)
3000mm long
F
2x U Channel (Step 4A)
780mm long ◊
G
1x U Channel (Step 4A)
1740mm long
*
◊
D
4x Cut-out Channel
3000mm long (Step 1 5)
K
2x Apex Channel (Step 2)
3055mm long
L
4x L Flashing (Step 3)
1600mm long
M
1x Ridge Beam (Step 3)
3000mm long
P
2x Z Door Jamb
1800mm
*
◊(Step 4B &5)
N
1x Door Strap (Step 4A)
780mm wide ◊
O
1x U Channel with Hinges
1740mm
*
◊(Step 4A)
S
1x Fixing Pack (Steps 1-5)
3.2mm pop rivets can be used
J
2x Gussets (Step 2)
400mm wide
R
1x Padbolt &Hasp (Step 5)
To secure the door ‡◊
Page 1.
H
2x Door Space Channel
793mm long ◊(Step 5)