Need help?Do you have a question about the DURAG D-LX 720 and is the answer not in the manual?
Provides key instructions for using the Compact Flame Monitor D-LX 200.
General guidelines for safe operation, adherence to instructions, and system conditions.
Warns of dangers from high voltage, electrical current, and ESD damage.
Warns about dangers in explosive atmospheres and handling hot/aggressive gases.
Defines requirements for personnel working with the device and its safety aspects.
Explains principles of explosion protection and the operator's responsibility.
Describes equipment with housings that withstand internal explosions.
Details ignition protection for non-sparking equipment in Zone 2.
Describes protection for dust atmospheres in Zone 21 and 22.
Explains ATEX markings and requirements for Ex-protected equipment.
Details ATEX markings for Zone 1 and 21 Ex versions.
Details ATEX markings for Zone 2 and 22 Ex versions.
Explains FM standards and classification for North American hazardous locations.
Details FM markings for Class I, II, Div. 1 hazardous areas.
Ensures safe installation, commissioning, and maintenance of Ex-equipment.
Explains the markings and details found on Ex-type labels.
Explains how the flame monitor detects flames and its safety function.
Provides a checklist to determine device suitability based on spectral range and fuels.
Explains the device's self-monitoring capabilities for failsafe operation.
Details error detection, shutdown procedures, and reset mechanisms.
Provides step-by-step instructions for safely opening the Ex-device housing.
Provides instructions on how to correctly close the Ex-housing hood.
Covers electrical installation, compliance with diagrams, and fuse positions.
Details adjusting intensity and flicker frequency thresholds using rotary switches.
Describes how to set amplification curves for optimal flame signal adaptation.
Outlines procedures for setting Flame OFF and Flame ON states and basic setup.
Highlights safety warnings for maintenance tasks, including electrical and environmental hazards.
Explains error detection, shutdown, and the role of LEDs in fault analysis.
Lists fault messages, their causes, and possible corrective actions.
Provides technical data for Ex-versions, including dimensions and protection ratings.
Shows the wiring diagram for the standard D-LX 200/720 models.
Shows the wiring diagram for D-LX 200/720 models with /MP3 plug connection.
To Next Page
General