Need help?Do you have a question about the Duratech EU - series and is the answer not in the manual?
Describes the heat exchanger's resistance to pool water.
Mentions factory testing and simple connection requirements.
Highlights efficient compressor and low-noise fan.
Refers to the electronic control panel for settings and status.
Lists key technical parameters like capacity, power input, and dimensions.
Provides visual representations and measurements of the unit.
General installation notes and warnings for the user.
Guidelines for selecting an optimal installation site.
Discusses the impact of piping distance on heat loss.
Emphasizes the importance of a check-valve for chemical protection.
Illustrates a common configuration for connecting the heat pump.
Step-by-step guide for setting up the bypass valve.
Instructions for connecting the unit to the power supply.
Procedures for initial power-on and system check.
Explains the phenomenon of condensation and its causes.
Details the functions of the control panel buttons and display.
Guide to configuring various operational parameters.
How to monitor real-time measurements and system status.
Instructions for configuring the internal clock.
How to program automatic on/off times for the unit.
Describes the safety function of the water pressure switch.
Explains protections against refrigerant over/under pressure.
Details the system to prevent compressor overheating.
How the unit manages and prevents ice formation.
Monitors water flow and temperature differential for safety.
Prevents operation when ambient or water temperatures are too low.
Safeguards the unit against freezing during cold periods.
Specifies recommended water balance parameters for optimal performance.
Instructions for adjusting the flow switch for proper operation.
Procedures to protect the unit during the off-season.
Steps to follow when recommissioning the unit in spring.
Routine inspections for ensuring safe and efficient operation.
Routine care tasks for ensuring unit longevity and performance.
A comprehensive guide to diagnosing and resolving common issues.
Lists and explains error codes for quick issue identification.
A pre-operation checklist for verifying correct installation.
Wiring schematics for different models of the heat pump.
A schematic illustrating the refrigerant circuit.
Outlines the terms, conditions, and limitations of the product warranty.
Details the procedure for returning products for repair or replacement.
General| Brand | Duratech |
|---|---|
| Model | EU - series |
| Category | Swimming Pool Heater |
| Language | English |
To Next Page