Need help?Do you have a question about the Duratech LINK Touch DLT10-RGB and is the answer not in the manual?
Details input voltage, interface, temperature, humidity, IP rating, size, and weight.
Lists included components and provides an overview of the LinkTouch functionality and modes.
Explains how to adjust light color temperature and brightness level.
Details how to cycle through color programs and switch all lights on or off.
Instructions for adjusting pool water temperature up or down.
How to turn the heat pump on/off and operate the pool cover (open/close).
How to activate the settings menu by touching the display for 3 seconds.
Using arrow keys to select desired settings and advanced ON/OFF control.
Explains icons related to battery status, charging, errors, and wireless communication signal.
Details icons for heat pump, pool lights, relays, and pool cover status or errors.
Defines the product's purpose and provides precautions for device setup and power connection.
Safety guidelines for operating the LinkTouch, including avoiding moisture and wet hands.
Instructions on how to clean, handle, and store the device safely, noting it's not waterproof or dustproof.
Guides the user to fully charge the LinkTouch before its initial use.
Explains how to initiate pairing mode for wireless connection with compatible devices.
Details two options for connecting via proximity or USB cable with specific control boards.
Describes two modes for cover operation: enabled (hold to operate) and disabled (touch to operate).
How to set the Aux function to 'Cover' or 'Auxiliary' for different device control.
Configuration of 'Aux Mode A' and 'Aux Mode B' to 'Toggle' or 'Pulse' functions.
General| Brand | Duratech |
|---|---|
| Model | LINK Touch DLT10-RGB |
| Category | Lighting Equipment |
| Language | English |
To Next Page