2
SPECIFICATIONS
AC input: 110V AC 60Hz – 240V 50Hz, detachable cord, 50W
DC input: 11– 15V DC, detachable DC cord with insta-gator clips, 70W
Battery types: 1– 10 NiCd or NiMH (1.2 – 12.0V)
1– 4 LiPo, Li-Ion, or LiFe (3.7– 14.8V)
Battery capacity range: 50-9900mAh
Fast charge current: 0.1– 8.0A linear, adjustable (4C limit for lithiums, 5A limit with AC input)
Fast charge termination: peak detection for NiCd/MH, cc/cv for lithiums
Fast charge safety timer: off - 300 minutes
NiCd/NiMH Peak sensitivity: 3– 20mV adjustable
NiCd/NiMHTrickle charge current: auto (1/20 fast chg setting), or manual adjust (0-250mA)
Lithium Balancing Accuracy: 5mV per cell
Lithium Balancing Socket: JST EH
Included balancing adapters: ElectriFly
®
& FlightPower
®
/Thunder Power Adapter Board
Lithium max. node current: 300mA
Controls: 4 pushbuttons
Battery memories: 10
Display type: 2 8 reversed LCD with backlight
Setup tones: on/off
Audible melodies: 5
*Output connections: banana jacks, radio jack, regular USB jack for charging mp3 players,
cell phones, etc (5V, 500mA), mini USB for firmware updates
Included output adapters: Banana plugs to Standard
Banana plugs to Traxxas
®
Banana plugs to Deans
®
Ultra
®
Male
Protective devices: solid-state reverse polarity and current overload
Case size: 6.3 5.3 1.7” (160 134 43mm)
Weight: 18.6 oz. (527.1g w/o cords connected)
SPECIAL FEATURES
● Detachable AC and DC input power cords.
● Built-in balancing for 1– 4S LiPo, Li-ion, or LiFe (LiFeSource) cells
● Up to 8 amps charge current, and 4C limit for lithiums (5A limit on AC)
● Includes a built-in radio battery jack
● Includes a built-in USB jack for charging music players, cell phones, etc. while at the track
● Includes Banana to Deans Ultra Male, Banana to Traxxas and Banana to Standard charging adapters
● Includes ElectriFly and FlightPower/Thunder Power adapter boards
STANDARD FEATURES
● A tiny built-in switching AC power supply is great for portability and cramped pit areas, yet can still deliver up to 8
amps charge current!
● Fully adjustable charge currents and multi-chemistry adaptability for a wide range of applications.
● A precise cc/cv charge algorithm carefully charges lithium-polymer, lithium-ion, or lithium ferrite-phosphate (A123)
batteries fully and safely!
● A peak detection system with automatic trickle charge fills NiCd and NiMH packs completely, for optimum battery
voltage and run-time. 3-20mV adjustable peak detection helps to customize charger-to-battery performance.
● A reversed LCD with backlight – previously only available in expensive racing chargers – is great for easy viewing in
any condition. Shows input and output voltages, peak voltage, charge current, charge capacity and time, and more!
● Pushbutton controls and audible tones make for easy setup and control.
● A built-in fan helps to keep all electronics cool, for long-lasting performance.
● Built-in banana jacks allow for connection with many commonly found charge adapters.
● A detachable DC power lead with alligator clips easily connects to many 12V DC power sources.
● Solid-state reverse polarity and current overload safety devices ensure trouble-free operation and long duration.
To Next Page
Loading...
