Ⅰ. General Safeguards
Safety Precautions
Before starting the engine, perform inspections according to
the procedures described on pre-operation inspections
to avoid accidents and damage to your machine.
For safety, never attempt using this GEP (gasoline
engine powered) water pump to deliver inflammable or
corrosive liquids (such as gasoline and acids). Likewise,
corrosive mediums, seawater, chemical solvents, alkaline
liquids (such as used gasoline, liquor and honey) should be
avoided.
Place the water pump on a solid, level position surface to
avoid tilting or turnover that may give rise to spilling of fuel.
To prevent fire hazards, keep the pump well ventilated
during operation and maintain a distance of at least l meter
between the machine and the wall or other machines.
Keep away from inflammable substances.
Do not allow children and pets to enter the working area as
this may increase the chance of their getting burned by hot
surfaces of the operating parts.
Know how to stop the water pump quickly how to operate
the controls. Do not use the pump against the prescribed
operating rules.
Please read this operation manual to have a
thorough understanding of the content there
before use the product. Failure to do so may
lead to personal injury or mechanical damage.
To Next Page
Loading...
