25
5.
Remove spark plug
Add oil to cylinder
Remove spark plug as shown in “Spark Plug Maintenance” on
page 18.
Add 2 tablespoons of 10W-30 motor oil directly into the
spark plug hole, and pull the recoil to lubricate cylinder. After
lubricating cylinder reinstall the spark plug as shown in “Spark
Plug Maintenance” on page 19.
6.
Store engine
The engine is ready to be stored in a cool dry area.
7.
CAUTION: Do not obstruct any ventilation openings and keep the engine in a cool
dry area.
To Next Page
Loading...
