EasyManua.ls Logo

Duronic IM540 - Cleaning; General cleaning guidelines; Component cleaning instructions

Duronic IM540
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Cleaning
Always switch off, unplug and dismantle before cleaning.
Never put the power unit in water or let the cord or plug get wet.
Do not wash parts in the dishwasher.
Do not clean with scouring powders, steel wool pads, or other
abrasive materials.
Outer Bowl
Wash then dry thoroughly.
Paddle
Remove the paddle from the power
unit. Wash then dry thoroughly.
Lid
Wash the lid then dry thoroughly.
Power Unit
Wipe with a damp cloth, then
dry.
Inner Bowl
Allow the inner bowl to reach room temperature before attempting
to clean. Take out the inner bowl and wash the inside of the bowl,
then dry thoroughly. Do not immerse in water.
The inner bowl should be placed in a freezer that is operating at a
temperature of -18°C ( -0.40° Fahrenheit) or below for 8 hours before use.
For best results always refrigerate the ingredients before making ice cream.
The addition of alcohol to recipes inhibits the freezing process.