Duruxx DRX2 - Troubleshooting: Oil and Idle Issues

77
Cylinder/piston/piston pin
wear off badly
Replace or repair
Piston ring& edge wear
Off badly
Replace
Excessive valve clearance
Adjust
Thrust half-ring wear off
badly
Replace
6 Excessive oil
consumption
Worn oil sealing of valve
pipe
Replace
Piston pin spring is weak or
the opening is not be cross
-
set
Replace or adjust
Worn cylinder port
Repair
Air vent system of crankcase
plugged
purge
7 Insufficient oil
pressure
Insufficient or excessive oil
Supply or decrease
·
Oil overheating
Repair cooling system
Oil too thin
Replace
Oil pipe leakage
Repair or replace
Oil filter plugged
Purge or replace
Oil pressure senor is
defective
Replace
8 Blow of exhaust
pipe
Exhaust valve is not sealed
Grind valve
Spark too late
adjust angle of spark and
then check cylinder pressure
9 No idle speed
Intake pipe leakage
Adjust or replace
accumulated
carbon/clearance the spark
plug is improper
Adjust
Spark timing is too early
Adjust
Throttle valve is defective
Adjust/replace air throttle
positioning
senor plug or
change it ，
adjust idle
stepper motor plug or
replace
Fuel supply not smooth
purge