DUSK Matilda - User Manual

Need help?

Do you have a question about the DUSK Matilda and is the answer not in the manual?

Summary

Important Information and Care

Assembly and Handling Tips

Tips for preparing the assembly area and handling the product to prevent damage.

Safety and Usage Precautions

Essential safety guidelines for users, including children, animals, and product stability.

Customer Support and Recycling

Information on obtaining assistance and responsible disposal of packaging materials.

Care and Maintenance Guidelines

Detailed instructions for cleaning and maintaining the product's finish and structure.

Assembly Preparation

Parts Checklist

List of all main parts required for assembling the Matilda Rattan Chair.

Fittings Checklist

List of all hardware and fittings included for chair assembly.

Tools Required for Assembly

Identifies the tools needed for the assembly process, noting any not supplied.

Assembly Steps

Step 1: Assemble Horizontal Braces

Attaching the horizontal braces to the left leg using specified fittings.

Step 2: Assemble Seat Plate

Connecting the seat plate to the assembled base structure.

Step 3: Assemble Backrest

Attaching the backrest component to the chair frame.

Step 4: Connect Right Leg

Connecting the right leg to the horizontal brace, seat plate, and backrest.

Step 5: Secure Seat Plate

Finalizing the assembly by securing the seat plate with screws.

The Matilda Rattan Chair is a piece of furniture designed for domestic use, suitable for living rooms, bedrooms, and dining areas. It is a self-assembly product, with an estimated assembly time of up to 30 minutes for one person.

Technical Specifications:

Range Name: Matilda
Box Dimensions: L76 x W56 x H26 cm
Components: The chair consists of several parts, including a left leg (1pc), a right leg (1pc), horizontal braces (2pcs), a seat plate (1pc), and a backrest (1pc).
Fittings: The assembly requires various fittings:
- M6*45mm Bolt (4pcs)
- M8 Nut (4pcs)
- M8 Spring washer (4pcs)
- M8 Flat washer (4pcs)
- Crescent pad (4pcs)
- M8x70mm Bolt (4pcs)
- 10mm*30mm Stick (12pcs + 1 extra)
- M3.5*30mm Screw (4pcs)
Tools Required: Spanner (1pc), M6 Allen Key (1pc), and a Crosshead Screwdriver (not provided).

Assembly Instructions:

The assembly process is broken down into five steps:

Assemble the two horizontal braces on the left leg: This step involves attaching two horizontal braces to the left leg using specific fittings. The required fittings are 2 pcs of B (M8 Nut), 2 pcs of C (M8 Spring washer), 2 pcs of D (M8 Flat washer), 2 pcs of E (Crescent pad), 2 pcs of F (M8x70mm Bolt), 4 pcs of G (10mm*30mm Stick), and 1 pc of I (Spanner).
Assemble the seat plate: The seat plate is attached in this step, requiring 2 pcs of G (10mm*30mm Stick).
Assemble backrest: The backrest is assembled using 2 pcs of A (M6*45mm Bolt) and 1 pc of J (M6 Allen Key).
Connect the right leg to the horizontal brace, seat plate, and backrest: This is a crucial step where the right leg is connected to the previously assembled components. The fittings required are 2 pcs of A (M645mm Bolt), 2 pcs of B (M8 Nut), 2 pcs of C (M8 Spring washer), 2 pcs of D (M8 Flat washer), 2 pcs of E (Crescent pad), 2 pcs of F (M8x70mm Bolt), 4 pcs of G (10mm30mm Stick), 1 pc of I (Spanner), and 1 pc of J (M6 Allen Key).
Secure the seat plate: The final step involves securing the seat plate using 4 pcs of H (M3.5*30mm Screw) and a crosshead screwdriver.

Safety and Care:

Assembly Environment: Lay out all parts on a clean, soft, and level surface to prevent damage to the unit or floor. Identify all parts and fittings before starting assembly.
Location: Assemble the chair in the room where it will be used to avoid damage during movement.
Children and Animals: Keep children and animals away from the assembly area due to small components that could pose a choking hazard. Plastic and wrapping materials should also be kept away to prevent suffocation.
Usage Restrictions: Do not stand on the product. Pregnant women should exercise additional care. Children should always be under direct adult supervision and never left unattended.
Stability: Always use the chair on firm, level ground, ensuring all legs remain in contact with the surface.
Cleaning: Clean only with a damp cloth. Avoid bleach or abrasive cleaners, as they can damage the finish. Do not use a very wet cloth or allow liquids to contact the veneer for extended periods. Wipe spills immediately to prevent warping or delamination. Do not scrub or rub the surface.
Movement: Lift the chair when moving it; do not drag it across the floor.
Heat Protection: Use placemats or coasters for hot items to protect the wood surface.
Environmental Factors: Avoid placing the chair near heat sources (radiators, fires) or direct sunlight, as this can cause the wood to crack, split, or fade due to changes in humidity and temperature.
Wood Mellowing: Wood will naturally mellow and change color over time. Regularly move ornaments and items placed on the surface to prevent uneven mellowing.
Fixings: Regularly check all fixings and re-tighten if necessary to ensure they have not come loose.
Sharp Objects: Avoid using sharp items like screwdrivers or other pointy tools on the chair's surface.