This document outlines the assembly, usage, and maintenance instructions for the Hattie Dining Table, a product from DUSK.COM, specializing in living, bedroom, and dining furniture.
Function Description:
The Hattie Dining Table is designed for domestic use, providing a stable and stylish surface for dining and other household activities. It features a round tabletop supported by a cylindrical leg, offering a contemporary aesthetic suitable for various interior designs. The assembly process is straightforward, requiring two people and an estimated assembly time of up to 30 minutes.
Important Technical Specifications:
- Range Name: Hattie
- Box Dimensions: L129 x W129 x H10 (cm)
- Assembled Dimensions: L51 x W51 x H79 (cm) - Note: There appears to be a discrepancy between the box dimensions and the assembled dimensions provided. The assembled dimensions L51xW51xH79(cm) seem more plausible for a dining table, while the box dimensions L129xW129xH10(cm) might refer to the tabletop packaging.
- Assembly Time: Up to 30 minutes
- Personnel Required for Assembly: Two persons
- Intended Use: Domestic use only; not for commercial purposes.
Usage Features:
The Hattie Dining Table is designed for ease of use and stability.
- Assembly: The assembly process involves three main steps:
- Disassemble the support from the tabletop: This initial step prepares the components for reassembly in the correct order. The bolts and washers removed in this step are crucial for later steps.
- Attach the support to the leg: The support structure is flipped over and secured to the table leg. Due to the weight of the components, it is emphasized not to tilt the table leg during this step to ensure stability and prevent damage. This step uses 4 M8x25mm bolts (C) and an Allen Key (D).
- Attach the tabletop to the leg: The tabletop is carefully lifted onto the assembled leg and support structure from underneath. It is critical to partially screw in all screws before fully tightening them to ensure proper alignment and secure attachment. This step uses 6 M8 Flat washers (A), 6 M8 Spring washers (B), 6 M8x25mm bolts (C), and an Allen Key (D). A safety warning is included: "Please mind your head" during this step, indicating the need for caution when working underneath the tabletop.
- Stability: The design emphasizes stability, with instructions to ensure all legs remain in contact with the ground and to avoid tilting the table.
- Placement: It is recommended to assemble the table in its intended room to prevent damage during relocation.
Maintenance Features:
Proper care and maintenance are crucial for the longevity and appearance of the Hattie Dining Table.
- Cleaning:
- Only use a damp cloth for cleaning.
- Avoid bleach or abrasive cleaners, as they can damage the finish.
- Do not use a very wet cloth or allow liquids to contact the veneer for extended periods.
- Wipe up any spills immediately to prevent warping or delamination of finishes due to absorption.
- Do not scrub or rub the surface during cleaning.
- Handling:
- Do not tilt the table; ensure the bottom of the leg always fully touches the floor.
- When moving the dining table, lift it off the floor instead of dragging it to prevent damage.
- Protection:
- Use placemats or coasters for hot items (e.g., hot drinks, dishes) to protect the wood surface.
- Avoid placing the table near heat sources (radiators, fires) or in direct sunlight, as this can cause the wood to crack, split, or fade due to changes in humidity and temperature.
- Wood Care:
- Wood will naturally mellow and change color over time. To prevent uneven mellowing, regularly move ornaments and items placed on the surface.
- Fixings:
- Regularly check all fixings to ensure they have not come loose. Re-tighten if necessary to maintain structural integrity.
- Tools:
- Avoid using sharp or pointy tools (e.g., screwdrivers) on the table surface to prevent scratches or damage.
Safety and Support:
- Children and Animals: Keep children and animals away from the assembly area due to small components that pose a choking hazard. All plastic and wrapping materials should also be kept away to prevent suffocation risks. Children should not be left unattended and must always be under direct adult supervision when using the product.
- Adult Safety: Do not stand on the product. Pregnant women should exercise additional care when using the product.
- Customer Service: For any questions or issues, contact the customer service team at 0113 519 0311.
- Recycling: Dispose of packaging safely and environmentally friendly, recycling where possible. Keep assembly instructions for future reference.
Need help?
General
To Next Page
