DUSK Hattie - Parts and Fittings List; Table Components; Hardware Fittings

2
Please check you have all the fittings listed below with your product.
A
B
C
D
M8 Flat washer 7pcs
(1 extra，2 pre-attached)
M8 Spring washer 7 pcs
(1 extra, 2 pre-attached)
M8x25mm bolt 11pcs
(1 extra, 2 pre-attached)
Allen Key 1 pc
P-3 / 5
Fittings list
Parts list
Before you start to build your Hattie dining table, please take a moment to read through the instructions and make
sure that you have all the relevant parts listed on the parts checklist.
1
Table Top & Support 1 pc
2
Table Leg 1pc
1
1