The provided manual describes the assembly, usage, and maintenance of the Evie Desk, a furniture item designed for domestic use.
Function Description:
The Evie Desk is a multi-purpose desk primarily intended for living, bedroom, or dining areas. It features a spacious top panel, a bottom panel, and multiple side and back panels that form the main structure. The desk incorporates two drawers, providing storage space for various items. The design includes a sturdy frame with legs and leg supports, ensuring stability. The desk is designed for a two-person assembly and is estimated to take up to 30 minutes to assemble.
Important Technical Specifications:
- Range Name: EVIE
- Box 1 Dimensions: L134.5 x W53 x H13 (cm)
- Components:
- Top panel (1 pc)
- Bottom panel (1 pc)
- Left side panel (1 pc)
- Right side panel (1 pc)
- Middle panel (1 pc)
- Back panel (2 pcs)
- Left drawer front (1 pc)
- Right drawer front (1 pc)
- Drawer left panel (2 pcs)
- Drawer right panel (2 pcs)
- Drawer back panel (2 pcs)
- Drawer bottom (2 pcs)
- Leg (2 pcs)
- Front leg support (1 pc)
- Back leg support (1 pc)
- Metal support (2 pcs)
- Bottom leg support (1 pc)
- Fittings: A comprehensive list of fittings is provided, including various screws (CAM Lock Screws M6x35, M6x44, M3.5x14mm, M3x12mm, M7x50mm, M3.5x35mm, M4x12mm, M4x40mm), CAM Locks (Φ15x11mm), Wooden Dowels (Φ8x30mm), Plastic Buckles (15x9mm), Bolts (M6x12mm, M6x25mm, M6x35mm), Allen Keys (4mm), Drawer Slides (285mm), Adjustable Feet (M6), Expansion Tubes (Φ8mm), and L-shaped Brackets (76x32mm). The quantities for each fitting are specified, often including extra pieces.
- Drawer Slides: The assembly process highlights the importance of separating the drawer slides before assembly and ensuring the sliding module is at the front end when connecting.
Usage Features:
- Domestic Use: This product is exclusively intended for domestic use and not for commercial purposes.
- Stability: Users are advised to always use the desk on firm, level ground, ensuring all legs remain in contact with the surface.
- Safety:
- Do not stand on the product.
- Pregnant women should exercise additional care when using the product.
- Children should always be under direct adult supervision and never left unattended.
- Keep children and animals away from the assembly area due to small components that could pose a choking hazard.
- All plastic and wrapping materials should be kept away from children and animals to prevent suffocation.
- Placement: It is not recommended to place the desk next to heat sources such as radiators, fires, or in direct sunlight, as this could potentially damage the item.
- Movement: When moving the desk, it should be lifted off the floor rather than dragged to prevent damage.
- Surface Protection: Use placemats or coasters when placing hot items (e.g., hot drinks, dishes) on the table surface to protect it. Due to the delicate nature of the product, hard items should be placed gently onto the table top to avoid damaging the surface.
Maintenance Features:
- Cleaning:
- Only use a clean, colourless sponge or cloth for cleaning to avoid colour transfer or smearing.
- Do not use bleach or abrasive cleaners, as they may damage the table top over time.
- Avoid using a very wet cloth or allowing any liquid to contact the table for extended periods. Wipe any spills immediately.
- Do not scrub or rub the surface when cleaning.
- Fixings: Regularly check all fixings to ensure none have come loose. Re-tighten if necessary to maintain structural integrity.
- Sharp Items: Avoid using sharp items such as screwdrivers or any pointy tools on the desk surface to prevent scratches or damage.
- Recycling: Packaging should be disposed of safely and in an environmentally friendly way, with recycling encouraged where possible. The assembly instructions should be kept safe for future reference.
Need help?
General
To Next Page
