12
Before you begin , it's best to identify all of the parts and fittings to build your table frame.
We advise laying these out on the clean and flat floor to check you have everything , and to
familiarise yourself with all of the parts and fittings before building.
We recommend that you assemble the table in the room you'd like it to be located. This will
help prevent any risk of damage to the frame whilst moving it.
1. Only use clean , colourless sponge or cloth to avoid any colour transfer or smearing , do
not use bleach or abrasive cleaners as they may damage the table top over time.
2. Do not use a very wet cloth or allow any liquid to contact with the table for a long
period of time . Wipe any spillage immediately.
3. Do not scrub or rub the surface when cleaning.
4. Do not drag the table when moving , lift it off the floor instead.
5. Use a placemat or a coaster when putting hot items ( e . g . hot drinks and dishes ) on the
table surface.
6. It is not recommended to place the item next to sources of heat such as radiators , fires or
directly exposed to sunlight.
7. Regularly check all fixings to ensure none have come loose . Re - tighten if necessary.
8. Avoid sharp items such as a screwdriver or any pointy tools.
9. Dispose of all packaging carefully and responsibly - recycle where possible.
10. Due to the delicate nature of this product , please gently place hard items onto the
table top to avoid damaging the surface.
To Next Page
Loading...
