Dux Endurance six User Manual

Installation regulations and general guidelines for the DUX six unit.

Steps for inspecting the unit upon delivery for damage or discrepancies.

Details the physical dimensions and connection points of the DUX endurance six unit.

Provides an exploded view with a numbered list of unit components and their descriptions.

Lists technical specifications, gas consumption, pressure, and dimensions for the unit.

Information about the location of the unit's data plate.

Specifies the approved gas types for the appliance and warnings.

Provides specific depth, width, and height measurements of the heater.

Advises users to read warning labels located on the unit's side.

Details approved installation positions, emphasizing outdoor use only.

Guidance on mounting the unit securely, considering its weight.

Table detailing minimum clearances for various flue terminal configurations.

Instructions for connecting the gas supply, including unions, cocks, and pipe sizing.

Details requirements for cold water inlet connection, including valve types and pressure.

Instructions for connecting the hot water outlet, pipework insulation, and testing.

Specifies power supply, plug type, outlet requirements, and safety for maintenance.

Illustrates the electrical connections and component layout for the unit.

Shows wiring from the main unit to remote controls (Main, Shower/Sub).

Lists available remote control models and their intended use.

Crucial safety and placement warnings for remote controls.

Details installation and wiring for the main remote control.

Details installation and wiring for shower/ensuite remote controls.

Steps for connecting wiring to the main unit.

Procedures for testing the unit and controls after installation.

Explanation of the main remote controller's display and buttons.

Explanation of the bath/ensuite remote controller's display and buttons.

Lists parts and provides visual guides for mounting remote controls.

Safety guidelines for installing the main remote control.

Step-by-step instructions for mounting the main remote controller.

Safety guidelines for installing bath/ensuite remote controls.

Step-by-step instructions for mounting bath/ensuite remote controls.

Step-by-step guide on operating the remote controls.

Explanation of how the priority control feature works.

Critical warning about changing temperature during use.

Advice on safe and energy-efficient use of remote controls.

Do's and don'ts for maintaining the unit.

Steps to take if a gas smell is detected.

Information on unit behavior during power outages.

Highlights critical safety points and warnings.

Warning against indoor installation due to combustion risks.

Warning about gas leaks and fire hazards.

Emphasizes checking gas and power type against the rating label.

Prohibits unauthorized disassembly, repair, flammable items, and rubber tubing.

Explains the freeze prevention feature and power requirement.

Advises on insulating external pipes and fittings.

Advises checking water temperature before use.

Procedures to follow during emergencies like earthquakes or fires.

Warnings about electric shock from wet hands and proper plug insertion.

Warnings against pulling cords or using bundled cords to prevent fire.

Advises checking operational status via remote control lamps.

Warning that water on remote controls can cause failure.

Advises against installing near TVs/radios to prevent interference.

Recommends turning off power during thunderstorms.

Emphasizes leaving space for checking and maintenance.

Explains the self-diagnosing function and error codes.

Lists error codes, problems, and recommended remedies.

Information on obtaining replacement power cords.

Warning that only authorized persons should perform service.

Recommends regular annual maintenance for optimal service life.

Details the manufacturer's warranty period and coverage.

Lists conditions under which the warranty does not apply and liability limits.

Stresses the importance of installing according to the manual.

Mentions consumer rights protected by legislation.

Outlines limitations on Dux Manufacturing Limited's liability.

Excludes implied warranties and liability for damages.

Defines service areas and procedures for warranty claims.

Clarifies that installer-supplied parts are not covered.

Clarifies labor costs for installation issues and consequential loss.

Specifies warranty duration for heat exchanger and electronic components.

Warns against using the 50°C unit with solar water heaters.

Reiterates compliance with installation codes and local by-laws.

Details pipework requirements and insulation for hot water.

Visual guide for hot water pipework layout and distance.

Step-by-step commissioning process for the water heater.

Notes the factory setting at 50°C and no need for a tempering valve.

Refers to the main handbook and provides additional hot water outlet connection instructions.

Specifies minimum pipework length and insulation for hot water lines.

Illustrates the hot water pipework connection to fixtures.

Instructions for testing water temperature at taps after installation.