INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 1 | Remove the seat belts
mounting bolt cover by pulling down
on top and away from seat belt. Use a
T50 Torx tool to remove the seat belt
mounting bolt
STEP 2 | Using the T50, remove the
(3) bolts shown holding the hardtop to
the cab.
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.
(8) M6x20 Bolts
(20) M6 Flat Washers
(6) M6 Nylock Nuts
(4) M6x14 Bolts
(2) M8x30 Bolts
(2) M8 Flat Washer
HARDWARE INCLUDED
To Next Page
