INSTALLATION MANUAL
NEED HELP?
855-680-9595
STEP 3 | Using the factory hardware,
loosely install the rear bracket onto the
hardtop mount.
Note the orientation to ensure you have the
correct bracket.
STEP 4 | Loosely Install the forward
bracket on the hardtop mount using a T50
torx bit and the factory hardware.
Note the orientation to ensure you have the
correct bracket.
STEP 5 | Lastly, using a #5 allen head
and the provided M8 bolt, loosely install
the roll bar bracket onto the vehicle.
Note the orientation to ensure you have the
correct bracket.
To Next Page
