Model 1430 Microtector
®
Electronic Point Gage
Installation and Operating Instructions
Model 1430 Microtector
®
Portable
Electronic Point Gage combines mod-
ern, solid-state integrated circuit elec-
tronics with a time-proven point gage
manometer to provide fast, accurate
pressure measurements.
SPECIFICATIONS AND FEATURES
*
• Accurate and repeatable to ± .00025
inches water column
• Pressure range: 0 - 2˝ w.c., positive,
negative, or differential pressures
• Non-toxic and inexpensive gage fluid
consists of distilled water mixed with
a small amount of fluorescein green
color concentrate
• Convenient, portable, lightweight
and self-contained, the unit requires
no external power connections and
is operated by a 1.5 volt penlight cell
• A.C. detector current eliminates
point plating, fouling and erosion
• Micrometers are manufactured in accor-
dance with ASME B89.1.13-2001, and
are traceable to a standard at the National
Institute of Standards and Technology
• Three-point mounting, dual leveling
adjustment, and circular level vial
assure rapid setup
• Durablock precision-machined acrylic
plastic gage body
• Sensitive 0 - 50 microamp D.C. meter
acts as a detector and also indicates
battery and probe condition
• Heavy 2˝ thick steel base plate
provides steady mounting
• Top-quality glass epoxy circuit board
and solid-state, integrated circuit
electronics
• Electronic enclosure of tough, molded
styrene acrylonitrile provides maximum
protection to components yet allows
easy access to battery compartment
• Rugged sheet steel cover and carrying
case protects the entire unit when not
in use
• Accessories included are (2) 3-foot
lengths Tygon tubing, (2) 1/8˝ pipe
thread adapters and 3/4 oz. bottle of
fluorescein green color concentrate
with wetting agent
Maximum pressure: 100 psig with
optional pipe thread connections.
Bulletin D-57
*
Patent No. 3,726,142
D-57 10/5/05 3:59 PM Page 1
To Next Page
Need help?
General
