16
5-1 Attaching the Strap
● Insert the thin end of strap into the strap holder.
.
● Pass the other end of strap through the loop.
● Stretch the strap tightly.
5-2 Loading Batteries
● Turn the camera off.
● Insert two AA alkaline batteries or rechargeable batteries.
Please make sure the batteries are fully charged. If the
batteries are low, please change the batteries as soon as
possible to maintain normal date/time operation.
※ If the battery power indicator only shows one black block, the
flash is disabled. If power is less than 1.8V (the level at which
the battery power indicator turns red) the camera automatically
turns off.
● Slide the switch on the battery cover in the direction
indicated by the arrow.
Chapter 5 Preparing Your Camera
To Next Page
Loading...
Need help?
General
