practice to leave the unit running for a full 8-10 hour shift and only turn the unit off if it will be off for more
than a few hours or overnight.
Figure 2. BlueWave 75 Front Face Plate
Assembly and Setup
Unpacking and Inspecting Your Shipment
Depending upon your order, your BlueWave 75 will arrive in one or two boxes. Inspect the boxes for damage
and notify the shipper of box damage immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are missing, contact your local
Dymax representative or Dymax Customer Support to resolve the problem.
Parts Included with the BlueWave 75
■ BlueWave 75 Spot Curing Lamp (1)
■ BlueWave 75 Spot-Curing System User Guide (2)
■ UV Protection Goggles (3)
■ Power Cord; Style Dependent on Model Ordered (4)
40078 – 115V Standard North American Power Cord
40077 – Type G Power Cord
40183 – No Power Cord (Note: For European customers, the appropriate power cord will be added)
■ Tools - Hex Wrench (5) & Screw Driver (6)
■ Footswitch (7)
To Next Page
Loading...