Dymo LabelManager 210D+ - Adding Special Characters

11
LabelManager
®
210D+
User Guide
Adding Special Characters
Symbols, clip art, and other special characters can be added to your labels.
Adding Symbols and Punctuation
The complete list of symbols available is shown on page 16. The short cut keys
will take you quickly to the type of symbol you are looking for.
To insert symbols
1 Press the short cut key for the type of symbol you wish to add.
You can also press and select Symbols to view all the symbols
available.
2 Use the navigation keys to select the desired image. Press  or  to move
across a row; press  or  to move from row to row.
3 Press to add the image to your label.
Adding Clip Art
The label maker includes the clip art shown on page 15.
To insert clip art
1 Press .
2 Use the navigation keys to select the desired image. Press  or  to move
across a row; press  or  to move from row to row.
3 Press to add the image to your label.
Adding International Characters
The label maker supports the extended Latin character set using RACE
technology.
After pressing the key, repeatedly pressing a letter scrolls through the
available variations of that letter.
For example, if you press the letter a, you will see a à â æ and so on through all
the variations available.
To add accented characters
1 Press . The accented character indicator is shown on the display.
2 Press an alpha character. The accent variations are displayed.
3 When the desired accented character appears, wait a few seconds for the
cursor to move beyond the character to continue entering text.
Pressing the symbols short cut key takes you quickly
to the first row of the symbols table which begins with
the punctuation symbols.
Pressing the currency short cut key takes you quickly
to the currency symbols.
Pressing the math short cut key takes you quickly to
the math symbols.