12
LabelManager
®
210D+
User Guide
Creating Fixed-Length Labels
Normally, the length of the label is determined by the length of the text. However,
you can choose to set the length of the label for a specific application.
If the text you entered does not fit within the fixed label length, a message is
displayed showing the smallest possible label length for this text. You can choose
a fixed length label from 1.5” (40 mm) up to 15” (400 mm) long.
To set the label length
1 Press until the menu appears.
2 Use the navigation keys to select Length and press .
3 Select Fixed and press .
4 Set the length for your label and press .
Using the Label Maker Memory
The label maker has a powerful memory feature that allows you to save the text of
up to nine frequently-used labels. You can recall saved labels and you can insert
saved text into a label.
Saving a Label
You can save up to nine frequently-used labels. When you save a label, the text
and all formatting are saved.
To save the current label
1 Press until the menu appears.
2 Use the navigation keys to select Save and press .
The first available memory location is displayed.
3 Use the navigation keys to move through the locations.
You can store new text in any of the memory locations.
4 Select a memory location and press .
Your label text is saved and you are returned to the label.
Opening Saved Labels
You can easily open labels saved in memory to use at a later time.
To open saved labels
1 Press until the menu appears.
2 Use the navigation keys to select Open and press .
The first memory location is displayed.
3 Use the navigation keys to select a label to open and press .
If the display currently contains label content, a message is displayed to
confirm you want to overwrite the current label.
To Next Page
Loading...
