Dymo LabelManager 210D+ User Manual

8
LabelManager
®
210D+
User Guide
Navigation Keys
You can review and edit your label using the left and right navigation keys. You
can move through menu selections using all four navigation keys, and then press
to make a selection.
CAPS
The CAPS key toggles between upper and lower case character entry. The
default is lowercase.
Shift
Pressing and holding the key and then pressing a character, enters an
uppercase character and when in uppercase or CAPS mode enters an lowercase
character.
NEW
The key clears the current text and formatting from the display, creating a
new label.
Backspace
The key deletes the character to the left of the cursor. Holding the key
deletes multiple characters.
Menu
The key displays the Symbols/Clip Art, Format, Memory, and Settings tabs.
Pressing the key repeatedly scrolls through the tabs.
 Use the symbols and clip art menu to insert symbols and clip art on
your labels. You can also use the short cut keys to quickly add symbols . See
Adding Special Characters on page 11.
 Use the format menu to set fixed label length, mirror text, or alignment.
 Use the memory menu to open or save labels.
 Use the settings menu to change the language and label width settings.
Cancel
The key exits from a menu without making a selection or cancels an action,
such as printing.
Symbols/
Clip Art Settings Format Memory

Dymo LabelManager 210D+ Specifications

General

Printing Technology	Thermal Transfer
Display	LCD
Resolution	180 dpi
Power Source	AC adapter
Label Width	6 mm, 9 mm, 12 mm
Font Styles	Bold, Italic, Outline, Shadow, Underline
Tape Width	6 mm, 9 mm, 12 mm