Dymo XTL 300 Quick Start Guide

Copyright
© 2015 Sanford, L.P. All rights reserved.
No part of this document or the software may be reproduced or transmitted in any form or by any
means or translated into another language without the prior written consent of Sanford, L.P.
“Sans” is a DejaVu font. The DejaVu fonts are based on Vera fonts copyright © by Bitstream, Inc.
Glyphs in the DejaVu fonts imported from Arev fonts are copyright © by Tavmjong Bah. All Rights
Reserved.
Trademarks
DYMO and XTL are trademarks or registered trademarks in the US and other countries. All other
trademarks are the property of their respective holders.

Dymo XTL 300 Specifications

General

Print Technology	Thermal Transfer
Resolution	300 dpi
Connectivity	USB
Display	LCD
Maximum Print Width	54 mm
Power	AC adapter
Print Speed	23 mm/sec
Compatible Label Materials	Vinyl, Polyester
Tape Sizes	6 mm, 9 mm, 12 mm, 19 mm, 24 mm