Using SRD with DSSS (Direct
Sequence Spread Spectrum) and
other than FHSS wideband
modulation.
1. Maximum EIRP density is 2mW/
MHz. Maximum100mW (20dBm)
EIRP is permitted to use.
2.
Maximum EIRP density is 20mW/
MHz. Maximum 100mW (20dBm)
EIRP is permitted to use with the
following condition:
It is permitted to use SRD for
outdoor applications only for
purposes of gathering telemetry
information for automated
monitoring and resources
accounting systems or security
systems.
3. Maximum EIRP density is 10mW/
MHz. Maximum 100mW (20dBm)
EIRP.
Indoor applications is permitted
to use.
Ukraine: Limited
implementation
EIRP =100mW (20dBm) with built-in
antenna’s maximum gain is 6dBi.
Restrictions for Use of 5725-5875MHz Frequencies in Europe
Russian
Federation:
Limited
implementation
When duty cycle is 0.1% or using
LBT (Listen Before Talk)
technology. Antenna height should
not exceed 5m, with maximum
EIRP 25mW (13.98dBm) is
permitted to use.
Software Version and Maximum Power Output of the Wireless
Module
Europe: model AX201D2W
Software Version
Intel
®
PROSet/Wireless WiFi
Software 21.x and following
versions
User's Manual 7-9
To Next Page
Loading...
Need help?
General