Home—Displays the introduction of this utility.
Alerts—Allows you to check available alerts.
System Information—Allows you to view basic information of your
computer.
Options—Allows you to set options for showing a notification.
The settings or options explained here might vary depending on the model
you purchased.
dynabook Screen Rotation Utility
dynabook Screen Rotation Utility rotates the screen orientation between
landscape (normal) and landscape (flipped) by using the Ctrl + Alt + Up
arrow/Down arrow keys.
To access this utility, click Start -> dynabook Screen Rotation Utility.
The following options might be provided:
Screen Rotation—Rotate the screen orientation by using the Ctrl + Alt
+ Up arrow/Down arrow keys.
Confirmation message—Show a confirmation message when the
screen is rotated.
External display message—Show a message when the screen did not
rotate because an external display is connected.
dynabook Setup Utility
dynabook Setup Utility provides you a menu-based user interface so that
you can easily view and change BIOS settings.
To enter the dynabook Setup Utility, do the following:
1. Save your work.
2.
Click Start ->
(Power) and then select Restart.
3. Hold down the F2 key and then release this key just after the
computer is powered on.
4. Follow the on-screen instructions to proceed.
To save the changes and exit the utility, press the F10 key and proceed by
selecting Yes or select Exit -> Exit Saving Changes -> Yes. The
computer restarts immediately.
dynabook Maintenance Utility
dynabook Maintenance Utility is provided to erase the internal storage
drive. This utility allows you to delete all data and partitions and also
overwrite all sectors on the internal storage drive.
If there is an external hard disk drive connected to your computer, it can
also be erased. However, if you do not want to delete the data from the
external hard disk drive, disconnect it from your computer.
User's Manual
5-3
To Next Page
Loading...
Need help?
General