Figure 4-13 Connecting the HDMI™ out port
1. HDMI™ out port 2. HDMI™ cable
Do not plug/unplug an HDMI™ device under the following conditions:
The system is starting up.
The system is shutting down.
When you connect a television or external monitor to the HDMI™ port, the
display output device is set to HDMI™.
When you unplug the HDMI™ cable and replug it, wait at least 5 seconds
before you replug the HDMI™ cable again.
Settings for display video on HDMI™
To view video on the HDMI™ display device, be sure to configure the
settings otherwise you might find that nothing is displayed.
Be sure to use the function key to select the display device before starting
to play video. Do not change the display device or audio device while
playing media files.
Do not change the display device under the following conditions.
While data is being read or written
While communication is being carried out
Multi Monitor
Your computer supports the Multi Monitor function that can display image
on Multi Monitor independently.
The following combinations are supported:
Tablet computer only
Internal display
screen
USB Type-C™ port
(via USB Type-C™
adapter)
USB Type-C™ port (Docking
interface) (via USB Type-C™
adapter)
User's Manual 4-26
To Next Page
Loading...
Need help?
General