10
WARNING Children can be harmed by small parts, sharp edges and sharp
points in the vehicle’s unassembled state, or by electrical items.
WARNING In the unassembled state, this package contains small parts.
Adult assembly is required. Children should not handle parts, or help in assembly of
the vehicle.
Attaching the Handlebars
Tools required: One (1) 6mm Allen wrench.
1 Place the handlebar in the handle bar clamps.
2 Align the handlebar so that it is parallel to the fork and tighten the bolts using
a 6mm Allen wrench. When properly tightened, the handlebar should not move
forward or backward. Test the tightness of the connection by pulling and pushing
on the handlebar to ensure that it does not move in the clamps.
WARNING: Failing to properly adjust and tighten the bolts that affix the
handlebar can cause you to lose control and crash.
Attaching the Front Fender
Tools required: Phillips Screwdriver
(not included)
1 Align fender with the three holes in
the fork and insert the bolts. Tighten
securely using a Phillips screwdriver as
shown.
To Next Page
Loading...
Need help?
General
