11
MAINTENANCE
C
BEFORE EACH RIDE
Before each ride, check your Push-N-Play ride-on and its components against the
following checklist. In addition, if you have a crash or accident, even a minor one,
always inspect the Push-N-Play thoroughly before riding again.
• Check that wheels are straight.
• Check attachment of wheels.
• Inspect your wheel for wear or damage.
• Check the wheels to see if they can spin smoothly.
• Check to make sure that there are no broken or worn parts and that the Push-N-
Play ride on toy is operating smoothly.
WARNING: A Push-N-Play ride-on that does not work properly can cause you to
lose control and fall. Inspect the entire Push-N-Play ride-on thoroughly before every ride and
do not ride it until any problem has been corrected.
• Periodically inspect the Push-N-Play for wear or damage.
• To clean the Push-N-Play, use a mild soap and water solution and clean cloth.
• Rinse clean with water to remove soap residue.
• Replace worn parts.
IMPORTANT
• Do not let any child touch the wheels or be near them when the ride-on vehicle is
moving.
• To avoid accidents, please inspect the vehicle before riding to ensure that it is in
proper working order and safe to ride.
• Check all the screws, cap nuts and protective coverings regularly and tighten as
required. Check plastic parts on a regular basis for cracks or broken pieces.
• Do not wash the vehicle with water; clean it with a cloth.
To Next Page
Loading...
