7
TOOLS REQUIRED:
ASSEMBLY
Your new vehicle requires adult assembly. Please set aside around 20 minutes for
assembly. Please identify all parts before assembly and save all packaging material until
assembly is completed to ensure that no parts are discarded.
WARNING: THE PUSH-N-PLAY IS TO BE ASSEMBLED BY AN ADULT. As shipped in
the box it is partially assembled and contains potentially hazardous sharp edges and points
on screws in the unassembled state. The box contains a package of small parts, cap nuts
and fasteners that pose a choking hazard to small children. Assemble the Push-N-Play
without your child’s help and keep these hazards away from your child until assembly is
complete.
Phillips Screwdriver
(not included)
1. FOOT REST
• Turn car body up side down.
• Insert foot rest into bottom of seat and
snap into place.
• Ensure that foot rest is completely
seated.
B
2. REAR WHEELS
• Insert rear wheel assembly into axle
guides and snap into place.
• Ensure that rear wheel assembly is
completely seated.
Foot
rest
Car body
To Next Page
Loading...
