8
3. FRONT WHEELS
• Note different shapes of wheel pegs and
corresponding slots on vehicle body.
• Insert one front wheel assembly into
correct slot on body, and snap into
place.
• Repeat for other side, and ensure that
front wheels are completely seated.
4. REAR WINDOW
• Turn car over to upright position.
• Insert rear window assembly tabs into
slots on car body.
• Pivot rear window assembly forward
to snap into place.
• Ensure that rear window assembly is
completely seated.
5. FRONT WINDOW
• Insert front window assembly tabs
into slots on car body.
• Insert side panel assembly tabs into
slots on car body.
• Pivot front window assembly forward
to snap into place.
• Ensure that front window and side panel
assemblies are completely seated.
Front wheel
Rear window
assembly
Rear window
assembly
Front
window
assembly
Parent
push
handle
Side
panel
assembly
Car body
To Next Page
Loading...
