EasyManua.ls Logo

Dynacraft Push- N-Play - Pre-Ride Safety Checklist; Product Use and Maintenance Warnings

Dynacraft Push- N-Play
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
If you experience a problem with this product, or are missing a part, please call us
at 1-800-551-0032, rather than return this product to the store.
Please identify all parts before assembly and save all packaging material until
assembly is complete to ensure that no parts are discarded.
WARNING:
DO NOT USE NON-ORIGINAL OR
NON-RECOMMENDED PRODUCTS WITH YOUR
PUSH-N-PLAY RIDE-ON TOY.
Altering of the original components or use of non-recommended replacement
parts may or may not be compatible with the design and will void the warranty and
may cause an unsafe condition resulting in serious injury or death.
Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come
in contact with wheels or other moving parts.
Before each cycle of operation, you must perform the pre-operation checks
specied in this manual, including:
that the area that the unit is to be operated in is safe and suitable for safe
operation;
that all safety labels are in place and understood by everyone, including the
riders;
that tires/wheels are in good condition;
and that no parts are broken or worn.
Avoid sharp bumps, drainage grates, and sudden surface changes.
PRE-RIDE SAFETY CHECKLIST
Check to make sure that all parts and components are properly secured and are
functioning according to the manufacturers specifications.
Components must be maintained and repaired and only with the manufacturer's
authorized replacement parts. Installation should be performed only by adult,
qualified personnel.
WARNING: FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF
POTENTIALLY SERIOUS INJURY. USE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR
APPROPRIATE CLOTHING AND SHOES.

Related product manuals