-2
,D,+9--+11.
3.Push up throttle sticker , adjustment knob D, let the pitch degree +9-+11.
+11
,,
.
. :
(1),.
(2)，.
(3).
(4),,.
(5),
.
WARNING
RC helicopter is not toys! Incorrect operation may cause serious injury or damage. if you
are a novice pilot we strongly suggest that you should find an experienced pilot in RC
helicopter to assist you.
1. It is absolutely necessary to read the manual of the helicopter before operation ,it is
mandatory to check all control systems and mechanical linkages for proper operation
before every flight .safety first!
2.Since the helicopter fly very fast ,it may cause potential danger ,so the choice of the flight
field is of great importance.
3.Do not fly near crowd, high voltage cables or trees to ensure the safely of yourself and
others.
4.Do not fly in the bad weather such as rainy or thundering to ensure the safety of yourself.
5.It is suggested to fly at an open field for beginners, and fly with the training set to practice
yourself. in this case can the helicopter be protected and damage caused by the improper
operation can be reduced.
10
11
Parts Listing
Main blade
Plastic paddle
Tail blade Canopy set
Main blade clamp set
Linkage rod set
Tail blade clamp set
Main shaft set
Tail servo control
push rod set
Main blade housing
Main frame set
Fly bar caddles
Main gear set
Vertical and horizontal
tail blade set
Seesaw and sf-arm set
Tail driven set
Tail boom set
Landing skid set
Fly bar
Washout control arm
and washout base set
Tail blade controlling set
Swash plate set
Tail driven pedestal set
Tail blade main shaft set
ERZ-001 ERZ-002 ERZ-003 ERZ-004
ERZ-005 ERZ-006 ERZ-007
ERZ-008
ERZ-009 ERZ-0010 ERZ-0011 ERZ-0012
ERZ-0013 ERZ-0014 ERZ-0015 ERZ-0016
ERZ-0017 ERZ-0018 ERZ-0019 ERZ-0020
ERZ-0021 ERZ-0022
ERZ-0023 ERZ-0024
To Next Page
Loading...
