COMPUTER CONSOLE
(computer console subject to change)
How to change battery﹕
1. Open battery cover and insert two AAA batteries.
2. Properly replace the back battery cover.
3. Under normal circumstances, the life of the battery is approximately one year.
4. If the LCD shows a partial display, please remove the batteries, wait for 15 seconds, and then
re-insert the batteries. Please Note: all setting will be lost once the batteries have been removed.
5. Please follow local safety guidelines for the disposal of batteries.
Function Keys﹕
ENTER：
1. Press the ENTER key to select the functions for setting exercise values for TIME
and DISTANCE.
2. Press the ENTER key to confirm the set exercise values.
3. Keep pressing the ENTER key for 2 seconds to remove all previous exercise
data.
UP：
1.Press the UP key to switch between the functions of speed, average speed,
maximum speed, heart rate, maximum heart rate, RPM, average RPM and
maximum RPM.
2. Press the UP key to add the setting exercise values of TIME and DISTANCE. The
minimum setting value of TIME is 5 minutes. Pressing one time will add 5
minutes, for example: 0, 10, 15, 20, …..
DOWN：
1. Press the DOWN key to switch between the SPEED DISTANCE and
CAL PULSE.
2. Press the DOWN key to decrease the setting exercise values of TIME and
DISTANCE. The minimum setting value of DISTANCE is 1 km or mile.
Pressing one time will decrease 1 km or mile, for example : 7, 6, 5, 4, 3, 2,
1…
UP+DOWN：
1. Press the UP key and the DOWN key at the same time for 3 seconds to start
the “AUTO SCAN” function.
2. Under the condition of setting exercise values, Press UP key and DOWN
key at the same time for 1 second to remove the values.
To Next Page
Loading...
General